ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

Bose L1 Model II ชุดลำโพงโบส Portable PA System Single Bass System with ToneMatch Engine /4-channel Mixer, Loudspeaker Line Array 24-speaker 

Portable PA System with T1 ToneMatch Audio Engine/4-channel Mixer, Loudspeaker Line Array, Powerstand, B1 Bass Module, and Included Carrying Bags Portable Sound System

Bose L1 Model II All-in-one PA System Features:

• 4-channel PA system and stage monitoring solution
• Wide, uniform sound coverage, courtesy of Spatial Dispersion and Articulated Array speaker technologies
• Integrated power amplifiers can provide clean, precise amplification for up to two B1 bass modules
• Includes one B1 bass module
• Includes Bose's T1 ToneMatch audio engine and 4-channel mixer with more than 100 ToneMatch presets
•  

L1® Model II system with B2 bass

• Recommended for audiences up to 500
• 24-speaker articulated line array delivers 180-degree horizontal sound coverage
• Produces the most consistent tonal balance with little volume drop-off over distance
• System's interconnecting pieces allow for efficient transport, easy setup and breakdown
• One B2 bass module included

Boost your performance with the L1 Model II system, our most advanced portable amplification system for musicians, DJs and public speakers. The loudspeaker delivers 180 degrees of horizontal sound coverage and our smoothest tonal balance—across the stage and throughout the room. Includes one B2 bass module for more flexibility and even greater power at the low end.

Like the original, award-winning Bose L1 system, the Model II sound system is an all-in-one innovation that replaces conventional monitors, mixers and PA speakers. And this professional sound system is packed with proprietary Bose technologies designed to improve your amplified sound.

Sound advantages—only from Bose

The system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees—onstage and throughout an audience of up to several hundred—with little dropoff in volume and tone.

The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound.

Full, flexible bass

The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals.

You can power one B2 bass module on a single L1 power stand. And the optional PackLite® power amplifier lets you add a second B2 bass module for maximum low-end power.

Easy and efficient

The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems.

All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components.

Multichannel flexibility

The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools.

Features

 

Spatial Dispersion™ and Articulated Array® speaker technologies in the loudspeaker produce wide, uniform sound coverage. The 24 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure—creating nearly 180 degrees of horizontal coverage and consistent tonal balance.

 

 

Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model II system with up to two B1 bass modules or one B2 bass module.

 

 

ToneMatch® port on power stand for digital audio and power connection to ToneMatch audio engine.

 

 

Analog input, trim control and signal/clip LED for line-level analog input via ¼" TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems.

 

 

Bass module out for amplified bass output signal to the bass module. L1 system automatically adjusts equalization appropriately when bass modules are connected.

 

 

Bass line out delivers post-DSP bass signal output. Accepts ¼" TRS phone cable. Use to connect powered subwoofer, additional amplification system or Bose®PackLite® amplifier with up to two additional bass modules.

 

 

Retractable legs provide stability for streamlined power stands and loudspeakers. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport.

 

 

Convenient carry bags—one each for the loudspeaker, power stand and bass module—make getting to and from your gig that much easier.

 

B1 bass module

 

 

Compact, lightweight enclosure is easy to transport, set up and break down. Small footprint takes up considerably less space than traditional bass cabs required for same performance. Interlocking feet let you securely stack up to four modules together on their sides.

 

 

 

Highly efficient speaker design features two 5.25" (13.3 cm), high-output, high-excursion drivers that produce deep, strong bass from a small enclosure. When connected to power stand, active equalization circuitry automatically adjusts bass signal appropriately.

 

ToneMatch audio engine

 

 

Integrated ToneMatch audio engine and audio technologies provide four independent channels featuring a library of ToneMatch instrument and microphone presets, proprietary zEQ and a complete suite of studio-class effects and sound processors.

 

 

Proprietary ToneMatch presets optimize L1 system to match intended natural sound of specific instruments and vocal mics. More than 100 presets are organized into quick-access banks and can be independently assigned to each channel. Free ongoing updates via USB connection between your computer and ToneMatch audio engine.

 

 

Proprietary zEQ automatically adjusts the range of tone controls to match your voice or instrument, making it easier to fine tune your sound. Conventional mixers may have fixed EQ ranges that don't accurately affect desired frequencies when adjusted. But zEQ appropriately redefines low, mid and high frequency ranges of specified sources.

 

 

Single-band ParaEQ centers on frequency you specify for each independent channel. Valuable tool for reshaping problematic frequencies in certain venues.

 

 

Five reverb types (small, medium, large, plate and cavern) available for global assignment, with individual channel controls for decay time, mix level and brightness.

 

 

Three delay types (analog, digital and tape) can be independently assigned to selected channels, with control over feedback time and mix level for each channel. For example, you can select tape delay for your vocal on channel 1 and analog delay for your guitar on channel 2.

 

 

Ten modulation effects (three chorus types, two flange types, four phaser types and one vintage tremolo effect) can be independently assigned to selected channels, with control over designated parameters for each channel.

 

 

Seven dynamics processing types (three compressors, limiter, de-esser, kick gate and noise gate) can be assigned to independent channels.

 

 

Scenes allow you to store, recall and edit "snapshots" of all key ToneMatch audio engine settings at any given time. This feature helps simplify setup when you're using an L1 system repeatedly in different venues. The engine includes five predefined Bose scenes, five My scenes and five Shared scenes you can give to other L1 owners.

 

 

Chromatic tuner for convenient tuning of instruments.

 

 

Large backlit display with intuitive layout and easy-to-read text for modes and settings.

 

 

Rotary encoder for quick access to modes, effects and parameters, including ToneMatch presets, zEQ, ParaEQ, reverbs, delays, modulators, dynamics processing, scenes and tuner. Features clean, circular layout.

 

 

Aux mode (channels 1 – 3) send channels' dry, pre-fader or post-fader audio to aux output for connection to additional L1 systems or recording devices. Independent level controls for optimal signal output.

 

 

Channel volume, mute and FX mute (1 – 4/5) for adjusting individual channel volume, muting individual channels and muting all effects on selected channels.

 

 

Master volume adjusts overall level of master output.

 

 

Phantom power applies +48V power to input channels 1 – 3 to drive specific microphones.

 

 

ToneMatch cable transfers audio signals and provides power to ToneMatch audio engine from L1 power stand.

 

 

Mounting bar and carriage securely attaches ToneMatch audio engine to L1 loudspeaker.

 

 

Cover and carrying case help protect engine when storing and transporting.

 

Tech Specs

Number of Speakers	24 speakers, 1 woofer
Speaker Drivers	24 x Small Drivers, 1 x 5.25" woofer
Number of Mixer Channels	5
Number of Mic Preamps	3 Mic Preamps
EQ	Intelligent zEQ
Inputs	3 x XLR/Line Combo Jack, 2 x 1/4" TRS
Outputs	4 x 1/4" TRS
Headphones	No Headphone Outs
Playback	No Playback Inputs
Microphone	No Included Microphone
Enclosure Material	Polypropylene
Height	92 inches
Width	10 inches
Depth	27 inches
Weight	82.5 lbs. (with sub)

Included items

Dimensions

L1 Model II Cylindrical Radiator® loudspeaker top

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

16.3 lbs (7.4 kg)

L1 Model II Cylindrical Radiator® loudspeaker bottom

43.5"H x 3.5"W x 4"D ( 110.5 cm x 9 cm x 10.5 cm )

17.4 lbs (7.9 kg)

L1 Model II power stand

5"H x 10"W x 27"D ( 12.8 cm x 26.2 cm x 69.2 cm )

23.7 lbs (10.7 kg)

B1 bass module

15"H x 10.25"W x 17.75"D ( 38 cm x 26 cm x 45 cm )

25.1 lbs (11.4 kg)

T1 ToneMatch audio engine

Inputs/outputs

Mic/line inputs (1 - 3) feature combination analog connectors accepting balanced XLR or unbalanced ¼" TRS audio cables.

Line inputs (4/5, L/R) for analog stereo connections to keyboards, mixers and computers. Inputs accept balanced ¼" TRS cable. Edit control affects both channels.

Trim controls and signal/clip LEDs (1 - 4/5) for adjusting levels of input signals. Green/yellow/red LEDs show signal status and help you set gain levels properly.

Preamp outputs (1 - 3) for connecting channels' dry output signals to recording gear or other amplifiers via balanced ¼" TRS cable.

Aux output can be used with aux mode to create independent submix of channels 1 - 4/5 to route to other amplifiers or recording gear.

Master analog output for connecting to additional L1 systems, amplifiers or recording gear via balanced ¼" TRS cable. Select from pre- or post-master volume settings.

ToneMatch port to connect digital output of engine to L1 Model II power stand via included ToneMatch digital cable.

USB port for updating ToneMatch audio engine and backing up scenes via USB connection to your computer.

2.67"H x 6.5"W x 8.25"D ( 6.76 cm x 16.6 cm x 20.9 cm )

2.1 lbs (1 kg)