ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944

Feature  GLD-80

•  Compact digital mixer with scalable, remote I/O
•  Systems from 4 to 44 mics
•  1Easy to use, quick to access, analogue style interface
•  dSNAKE Cat5 digital snake—up to 120m cable length
•  8.4 inch colour touchscreen for graphical view and setup
•  20 faders, 4 layers, 80 channel strips in a freely customizable layout
•  48 input channels into 30 assignable buses (Aux, Group, Matrix, Main, FX Send) into 20 mix outputs
•  8 stereo RackFX engines* with dedicated ‘short’ returns with 4-band PEQ
•  Full processing on all inputs including trim, polarity, HPF, insert, gate, 4-band PEQ, compressor and delay
•  Full processing on all outputs including insert, PEQ, GEQ, compressor and delay
•  LR, None (monitors), LR+M (sum), LR+M (bus), LCR main mix modes
•  16 DCAs / mute groups
•  Built-in Talkback, RTA and Signal Generator
•  I/O module options for FOH/Monitor split, multitrack recording, link to iLive and more
•  MIDI In/Out and Ethernet Network port
•  AviomTM Pro16 compatible Monitor port on main AudioRack
•  High end 1dB step recallable mic/line preamps
•  User definable channel names and colours
•  Engineer’s mono Wedge and stereo IEM strips
•  Input, output and insert soft patchbays
•  Quick copy, paste and reset of mixes and parameters
•  Libraries, Scenes and Show memories with USB transfer

Feature  AR-2412

Input sockets 24 balanced XLR inputs for microphone and line level sources.

• The preamps are built into the AR2412 rack and their Gain, Pad and 48V phantom power is remote controlled from the GLD console via the dSNAKE link.
• The output of the analogue preamps are converted to digital format and transported via dSNAKE to be processed and mixed at the GLD-80 mixer.
• Any input can be patched to any channel at the console.

Output sockets 12 balanced XLR outputs operating at nominal +4dBu line level.

• Any GLD signal can be patched to any socket using the console I/O screen.
• The default Template Shows provide a logical mapping of these sockets to get  you started.

EXPANDER

• Port Cat5 cable link to connect a GLD-AR84 expander rack to add a further 8 mic/line inputs and 4 XLR line outputs.
• The GLD system numbers these sockets as Inputs 25-32 and Outputs 13-16.
• MONITOR port Cat5 cable link to connect to a personal monitor system.
• The port is compatible with the AviomTM A-16 system.
• dSNAKE port Cat5 cable link to connect the AR2412 rack to the GLD-80 mixer.
• This carries the 32 inputs, 16 outputs and the monitor port sends audio to and from the rack as well as control for the preamps and system status.
• Maximum Cat5 cable length is 120m. depending on cable type.

Fan

• A low noise fan ensures air movement  through the rack to keep the circuits within operating temperature range.

Mains power input

• IEC connector, fuse and power ON/OFF push switch for the built-in universal voltage power supply unit.
• This accepts worldwide voltages from 100 to 240V AC 50/60Hz.
• Check that you have received the correct mains lead for your territory.
• Secure the cable in place using the plastic P-clip.