ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
JBL GoRack เครื่องปรับแต่งเสียงแบบดิจิตอล Portable Performance Processor
มีสินค้าพร้อมส่ง สินค้าพร้อมส่ง
* สินค้าพร้อม จัดส่งฟรี
goRack ราคาโปรโมชั่น
เครื่องปรับแต่งเสียง DBX GORACK PERFORMANCE PROCESSOR เป็นอุปกรณ์สำหรับปรับแต่งเสียงแบบดิจิตอล
PROFESSIONAL AUDIO WHEREVER THE PERFORMANCE TAKES YOU
Historically, the convenience of portability in a PA System has meant a compromise in sound quality and fidelity. To answer that call, we at dbx Professional Products are proud to introduce the all-new goRack™ Portable Performance Processor. The goRack is an easy-to-use portable speaker processor. Based on our industry-leading DriveRack® Series, the goRack sits next to a set of powered speakers and provides powerful signal processing including Anti-Feedback (based on our AFS™ Advanced Feedback Suppression algorithm), Compression, Sub-Harmonic Synth and EQ. Each processing function can easily be enabled or disabled via top-level function buttons, and settings can be adjusted via goRack’s large data wheel.
goRack’s rear panel features combination 1/4”/XLR inputs that can be connected to either mixer outputs or microphones. When using a mic, the goRack's Mic/Line switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack’s 1/8” Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers.
The goRack represents the best of dbx’s DriveRack processing in its purest, most simplified form all housed in a sleek, compact form factor that fits in your hand, or back pocket. The goRack is perfect for applications from a mixer, or with its dual XLR inputs and Aux input, it can be used as a standalone performance processor/mixer for the solo artist.
Features
Compact Form Factor
Anti-Feedback Processing based on the dbx AFS™ (Advanced Feedback Suppression) algorithm
dbx Compression (based on the dbx 163)
Subharmonic Synthesis
EQ (16 Musical Genre-Based 31-Band Graphic EQ Settings)
Dual dbx Microphone Preamp/Line Inputs
Selectable Mic/Line Input Settings
Stereo Inputs and Outputs
Combination Mic/Line Input Jacks and XLR Outputs
1/8" Stereo Aux Input for Mobile Music Players/Devices
Independent Left and Right Channel Volume Controls
Specifications
Mic/Line Inputs 2, independently switchable between mic or line level
Mic/Line Input Connectors Female ¼” - XLR combination
Mic/Line Input Type Electronically balanced, RF filtered
Mic/Line Input Impedance Switch set to MIC: 2 kΩ balanced, Switch set to LINE: 22 kΩ balanced
Mic/Line Input Max. Gain Switch set to MIC: 48 dB, Switch set to LINE: 5 dB
Mic/Line Input Max. Input Level Switch set to MIC: 0 dBu, Switch set to LINE: +20 dBu
Mic/Line Input CMRR > 45 dB
Aux Input 1
Aux Input Connector Female stereo 1/8” (3.5 mm) TRS mini
Aux Input Type Unbalanced, RF filtered
Aux Input Impedance 20 kΩ
Aux Input Max. Input Level +20 dBu
Outputs 2 line outputs
Output Connectors Male XLR
Output Type Impedance balanced, RF filtered
Output Impedance 40 Ω
Maximum Output Level +14 dBu
Mic/Line A/D and D/A Converters 24-bit
Mic/Line A/D and D/A Dynamic Range 115 dB A-weighted
Aux Input D/A Converter 24-bit
Aux Input D/A Dynamic Range 106 dB A-weighted
Internal Processing Wordlength 32-bit floating point
Sample Rate 48 kHz
Dynamic Range 103.5 dB A-weighted, 102.5 dB unweighted
THD+Noise 0.04% typical at 0 dBu in/out, 1 kHz
Frequency Response 20 Hz – 20 kHz, +0 /- 0.5 dB
Latency < -80 dB, -84 dB typical
Power Supply PS0913DC-04 (9 VDC)
Operating Voltage 100-240 VAC, 50/60 Hz
Power Consumption 4.5 Watts (500 mA)
Unit Weight 1.2 lbs. (0.54 kg)
Shipping Weight 2.04 lbs. (0.93 kg)
Dimensions 6.1” (L) x 4.1” (W) x 1.69” (H), 154.9 mm (L) x 104.1 mm (W) x 42.9 mm (H)