ราคาพิเศษ สอบถามโทร :02-981-0944 ,080-614-4774,098-565-9747

Features:

• 40-channel digital mixer with 12 high-performance mic preamps
• 16 channels of bi-directional USB audio streaming
• Up to 40-channel simultaneous mixing
• Expandable with ADAT, AES/EBU, TDIF, or analog Mini-YGDAI cards
• Built-in ADAT I/O
• 01V96i Editor software lets you make settings for the 01V96i console from your computer
• Surround panning capability
• Balanced stereo main and monitor outputs plus 2-channel coax digital I/O
• Word clock I/O
• MIDI I/O
• Integrated DAW control (bundled with Steinberg’s Cubase AI)
  

  SPECIFICATIONS

  Outline		01V96i
  Mixing capability	Mixing channels	32 Mono + 4 Stereo
  	GROUP	8
  	AUX	8
  	MAIN	Stereo
  	Input channel functions	Gate, Attenuator, 4-band PEQ, 2x Compressor, Delay, Pan
  	Output channel functions	Attenuator, 4-band PEQ, Compressor, Delay
  	On-board processors	4x SPX multi effectors
  I/O	Mic inputs	12
  	Phantom power	+48V DC; ON/OFF per 4ch
  	Line inputs	2x Stereo, 2x 2tr in
  	AD converter	24-bit; 128-time over sampling
  	Line outputs	Stereo output, Monitor output, 4x Omni output
  	DA converter	24-bit; 128-time over sampling
  	Digital I/O	ADAT (8-in/8-out), 2tr in/out
  	Expansion slots	Mini-YGDAI (16-in/16-out)
  	Control and others	To Host(USB), MIDI, Word clock I/O
  General specifications		01V96i
  Internal processing		32bit, Accumulator: 58bit
  Sampling frequency rate	Internal	44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  	External	44.1kHz/88.2kHz (-10%) – 48kHz/96kHz (+6%)
  Signal delay		Less than 1.6ms CH INPUT to STEREO OUT (@SampIing frequency = 48kHz) / Less than 0.8ms CH INPUT to STEREO OUT (@SampIing frequency = 96kHz)
  Total harmonic distortion		CH INPUT to STEREO OUT: Less than 0.05%, 20Hz to 20kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 48kHz) / Less than 0.05%, 20Hz to 40kHz @+14dBu into 600Ω / Less than 0.01%, 1kHz @+24dBu into 600Ω (@SampIing frequency = 96kHz)
  Frequency response		CH INPUT to STEREO OUT: 0.5, -1.5dB, 20Hz – 20kHz @+4dBu into 600Ω(@SampIing frequency = 48kHz) / 0.5, -1.5dB, 20Hz – 40kHz @+4dBu into 600Ω(@SampIing frequency = 96kHz)
  Dynamic range		110dB typ. DA Converter (STEREO OUT) / 105dB typ. AD+DA (to STEREO OUT) @fs=48kHz / 105dB typ. AD+DA (to STEREO OUT) @fs=96kHz
  Hum & noise level	Equivalent input noise	-128dBu Equivalent Input Noise.
  	Residual output noise	-86dBu residual output noise. STEREO OUT: STEREO OUT off. / -86dBu (90dB S/N) STEREO OUT: STEREO fader at nominal level and all CH INPUT faders at minimum level. / -64dBu (68dB S/N) STEREO OUT: STEREO fader at nominal level and one CH INPUT fader at nominal level
  Crosstalk		-80dB adjacent input channels (CH1-12) / -80dB adjacent input channels (CH13-16) / -80dB input to output
  Power requirements		AC100V, 120V, 220-240V 50/60 Hz
  Power consumption		90W
  Dimensions	W	436mm; 17-1/8in
  	H	148mm; 5-7/8in
  	D	548mm; 21-5/8in
  Net weight		14kg; 30.86lbs
  Others		Fader: 100mm motorized x17

  Analog input characteristics

  Input terminal	PAD	GAIN	Actual load impedance	For use with nominal	Input level			Connector
  					Sensitivity	Nominal	Max. before clip
  CH INPUT 1 to 12	0	-60dB	3kohms	50-600ohm Mics & 600ohm Lines	-70dBu	-60dBu	-40dBu	A:XLR-3-31 type (Balanced) B:TRS phone jack (Balanced)
  		-16dB			-26dBu	-16dBu	+4dBu
  	20				-6dBu	+4dBu	+24dBu
  CH INPUT 13 to 16		-26dB	10kohms	600ohm Lines	-36dBu	-26dBu	-6dBu	TRS phone jack (Balanced)
  		+4dB			-6dBu	+4dBu	+24dBu
  CH INSERT IN 1 to 12			10kohms	600ohm Lines	-12dBu	-2dBu	+18dBu	TRS phone jack (Unbalanced)
  2TR IN [L,R]			10kohms	600ohm Lines	-10dBV	-10dBV	+10dBV	RCA pin jack (Unbalanced)

  Analog output characteristics

  Output terminal	Actual source impedance	For use with nominal	Output level		Connector
  			Nominal	Max. before clip
  STEREO OUT L,R	75ohms	600ohm Lines	+4dBu	+24dBu	XLR-3-32 type (Balanced)
  OMNI OUT 1 to 4	150ohms	10kohm Lines	+4dBu	+24dBu	TRS phone jack (Balanced)
  MONITOR OUT L,R	150ohms	10kohm Lines	+4dBu	+24dBu	TRS phone jack (Balanced)
  CH INSERT OUT 1 to 12	600ohms	10kohm Lines	-2dBu	+18dBu	TRS phone jack (Unbalanced)
  2TR OUT [L,R]	600ohms	10kohm Lines	-10dBV	+10dBV	RCA pin jack (Unbalanced)
  PHONES	100ohms	8ohm Lines	4mW	25mW	ST phone jack (Unbalanced)
  		40ohm Lines	12mW	75mW

  Digital input characteristics

  Terminal	Format	Data length	Level	Connector
  2TR IN DIGITAL	IEC-60958	24bit	0.5Vpp/75ohms	RCA pin jack
  ADAT IN	ADAT	24bit	–	OPTICAL

  Digital output characteristics

  Terminal	Format	Data length	Level	Connector
  2TR OUT DIGITAL	IEC-60958 Consumer use	24bit	0.5Vpp/75ohms	RCA pin jack
  ADAT OUT	ADAT	24bit	–	OPTICAL

  Digital input/output characteristics

  Terminal	Format	Data length	Level	Connector
  USB	USB2.0	24bit	–	B type USB connector

  Control I/O characteristics

  Terminal		Format	Level	Connector
  TO HOST USB		USB	0V – 3.3V	B type USB connector
  MIDI	IN	MIDI	–	DIN Connector 5P
  	OUT	MIDI	–	DIN Connector 5P
  	THRU	MIDI	–	DIN Connector 5P
  WORD CLOCK	IN	–	TTL/75ohms	BNC Connector
  	OUT	–	TTL/75ohms	BNC Connector