General specifications

Sampling frequency rate

External

44.1kHz or 48kHz

Signal delay

Less than 3ms INPUT to OUTPUT, connect with TF5 and NY64-D using Dante, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz

Total harmonic distortion

Less than 0.1% +4dBu@20Hz-20kHz into 600Ω, Gain=+66dB / Less than 0.05% +4dBU@20Hz-20kHz into 600Ω, Gain=-6dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18dB/octave filter @80kHz

Frequency response

+0.5, -1.5dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT, Fs=44.1kHz or 48kHz

Dynamic range

108 dB, INPUT to OUTPUT, Gain=-6dB / 112 dB, DA Converter

Hum & noise level

Equivalent input noise

-128dBu, Gain=+66dB *Measured with A-weighting filter

Residual output noise

-88dBu, ST master off *Measured with A-weighting filter

Crosstalk

-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB *Measured with a -30dB/octave filter @22kHz

Heat dissipation

100-240V, 50/60Hz, 43.5kcal/h

Power requirements

100-240V, 50/60Hz

Power consumption

50W

Dimensions

W

480mm (18-7/8")

H

88mm (3-4/8")

D

364mm (14-3/8")

Net weight

5.7kg (12.6lbs)

Accessories

Owner’s Manual, Power Cord(2.5m), Rubber stoppers(4)

Others

Temperature Range: Operating temperature range: 0 - 40℃, Storage temperature range: -20 - 60℃