| Power Supply |
200-240 V AC, 50/60 Hz |
| Power Consumption |
2,060 W (0.3 W with STANDBY MODE set to ECO,*1
4 W with STANDBY MODE set to NORMAL.) |
| DLP™ chip |
Panel Size |
24.1 mm (0.95 in)
diagonal (4:3 aspect ratio) |
| Display Method |
DLP™ chip x 3, DLP™ projection system |
| Pixels |
1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels |
| Refresh Rate |
120 Hz*2 |
| Lens |
Optional powered zoom and fixed-focus lenses |
| Lamp |
Normal |
UHM lamp x 4 (432 W), replacement cycle of up to 3,000 hours*3 |
| Portrait |
UHM lamp x 4 (432 W), replacement cycle of up to 700 hours |
| Screen Size (diagonal) |
1.78-25.4 m (70-1,000 in),
1.78-7.62 m (70-300 in)
with the ET-D75LE50,
3.05-15.24 m (120-600 in)
with the ET-D75LE90,
1.78-15.24 m (70-600 in)
with the ET-D75LE8,
4:3 aspect ratio |
| Brightness*4 |
20,000 lm (four-lamp) |
| Corner-to-Corner Uniformity |
90% |
| Contrast*4 |
10,000:1 (full on/off, with dynamic iris set to “3” ) |
| Resolution |
1,400 x 1,050 pixels*5 |
| Scanning Frequency |
SDI |
SD-SDI |
SMPTE ST 259 compliant,
[YCBCR 4:2:2 10-bit] 480i, 576i |
| HD-SDI |
SMPTE ST 292 compliant,
[YPBPR 4:2:2 10-bit] 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p |
| 3G-SDI |
SMPTE ST 424 compliant,
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p, [RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,
1080/24p, 1080/24sF, 1080/30p |
| Dual-link HD-SDI |
SMPTE ST 372 compliant,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p, [X´Y´Z´ 4:4:4 12-bit] 2048 x 1080/24p, 2048 x 1080/24sF |
Dual-link
3G-SDI |
SMPTE ST 425 compliant,
[YPBPR 4:4:4 12-bit / 10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p
[RGB 4:4:4 12-bit/10-bit] 1080/60p, 1080/50p, 2048 x 1080/60p, 2048 x 1080/50p, 2048 x 1080/48p |
HDMI/DVI-D/
DIGITAL LINK |
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF,
1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*6 (1920 x 1200),
compatible with non-interlaced signals only, dot clock: 25-162 MHz |
DVI-D/HDMI
simultaneous input |
1920 x 1200p, 1920 x 1080p, 1400 x 1050p, 1366 x 768p, 120 Hz/100 Hz |
| RGB |
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 13.5-162 MHz |
| YPBPR (YCBCR) |
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p] |
| Video/YC |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Optical Axis Shift*7 |
Vertical |
±50 % (±40 % with the ET-D75LE6,
+71 % (fixed) with the ET-D75LE90) (powered) |
| Horizontal |
±30 % (±20 % with the ET-D75LE6,
±0 % (non-movable) with the ET-D75LE90)
(powered) |
| Keystone Correction Range |
Vertical: ±40°, horizontal: ±15° |
| Keystone Correction Range with Optional Upgrade Kit |
Vertical: ±45°, horizontal: ±40° |
| Installation |
Ceiling/floor, front /rear, portrait*8 |
| Terminals |
SDI IN |
BNC x 2 (3G/HD/SD-SDI) |
| DVI-D IN |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| HDMI IN |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| RGB 1 IN |
BNC x 5 (RGB/YPBPR/YCBCR/VIDEO/YC x 1) |
| RGB 2 IN |
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1) |
| 3D SYNC IN/OUT |
BNC x 1 (3D timing signal) |
| 3D SYNC OUT |
BNC x 1 (3D timing signal) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT |
D-sub 9-pin (male) x 1 for link control |
| REMOTE 1 IN |
M3 x 1 for wired remote control |
| REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| REMOTE 2 IN |
D-sub 9-pin (female) x 1 for external control (parallel) |
| LAN/DIGITAL LINK |
RJ-45 x 1 (for network, DIGITAL LINK connection, 100Base-TX, compatible with Art-Net, PJLink™ (class 1), Deep Color, HDCP) |
| Cabinet Materials |
Moulded plastic |
| Dimensions (W x H x D) |
620 x 255 x 730 mm (24-13/32 x 10-1/32 x 28-3/4 in)
(optional lens, legs and lens cover not included) |
| Weight*9 |
Approx. 43 kg (94.8 lbs) (optional lens not included) |
| Operation Noise*4 |
46dB |
| Operating Environment |
Operating temperature: 0-45°C (32-113°F)*10,
operating humidity: 10-80 % (no condensation) |
| Applicable Software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software,
Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10*11 Auto Screen Adjustment Kit) |
| Supplied Accessories |
Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2), software CD-ROM (Logo Transfer Software, Multi Monitoring & Control Software) (x 1) |
