ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944
High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 115 dB dynamic range
Advanced digital signal processing supports audio at 48 kHz sample rate/24-bit, uses a floating-point open architecture DSP and operates at low latencies for sound system precision
Integrated AmpLink output connection uses standard Cat 5 cables to send up to 8 channels of low-latency, uncompressed digital audio to compatible Bose Professional amplifiers
ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixers, predictive feedback suppressors, room combiners, multiband graphic and parametric EQs, loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors and delays
A variety of control options — ControlSpace ESP products are compatible with programmable Bose Professional CC-64 controller, ControlCenter zone controllers and ControlSpace Remote clients
Supports industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports, with available drivers for AMX and Crestron-based systems
Designed for a wide range of applications, including:
Channel Separation (Crosstalk)
< -105 dB at +4 dBu, 1 kHz input signal
Dynamic Range
> 115 dB, A-weighted, 20 Hz – 20 kHz, analog through
Frequency Response
20 Hz – 20 kHz (+0.3 dB/-0.1 dB)
THD+N
0.002% at +4 dBu (A-weighted, 20 Hz – 20 kHz)
AEC-Enabled
No
Input Channels
8 balanced, mic/line
Connectors
(4) 6-pin Euroblock, 3.81 mm
Equivalent Input Noise
< -119 dBu at 64 dB gain (150 Ω input, 22 Hz – 20 kHz)
Sensitivity Options
0 dB, +14 dB, +24 dB, +32 dB, +44 dB, +54 dB, +64 dB, pre-gain
Input Impedance
12 kΩ at 1 kHz, with or without phantom power
Maximum Input Level
+24 dBu
Phantom Power
48 VDC, 10 mA, selectable per input
Channels
8 AmpLink out
(1) RJ-45 AmpLink out
Type
AmpLink (output)
8 balanced, line
Maximum Output Level
Output Impedance
66 Ω
EN 54-24 Certified
Inputs (Control)
(5) analog/digital, 6-pin Euroblock, 3.81 mm / (1) serial RS-232, DB9M / (1) ControlCenter CC-16, 3-pin Euroblock, 3.81 mm
Voltage Range, Analog
0 V – 3.3 V (5 V maximum)
Digital Input Voltage
0 V – 3.3 V (1.6 V threshold)
Outputs (Control)
(5) digital, 6-pin Euroblock, 3.81 mm
Output Current
10 mA source, 100 mA sink (24 VDC maximum external supply voltage)
Output Voltage
High: 8 V (open circuit), 2.5 V at 10 mA / Low: < 1 V at 100 mA, push-pull
Mains Connector
IEC 60320-C14 inlet
Mains Voltage
85–264 VAC, 50/60 Hz
AC Power Consumption
< 37 VA typical, over all mains voltages
Power Dissipation
22 W (75 BTU/hr, 19 kcal/hr)
Software Applications
ControlSpace Designer (Windows)
Computer Interface Connection
RJ-45 (Ethernet, 100 Mbps)
LED Status Indicators
(1) power/status LED, (1) input/output signal LED, (1) Ethernet LED, (1) serial control LED
Delay
43 s
A/D and D/A Converters
48 kHz / 24-bit
Audio Latency
860 μs, analog input to analog output
DSP-Enabled
Yes
Maximum Calculation
3.6 GIPS / 2.7 GFLOPS
Signal Processor/CPU
32-bit fixed/floating-point DSP + Arm 456 MHz processor
Sample Rate / Bit Depth
Colors
Black
Cooling System
Active, side-venting
Suspension/Mounting
Standard rack ears
Operating Temperature Range
0 °C to 40 °C (32 °F to 104 °F)
Product Dimensions (H×W×D)
1.7 in × 19.0 in × 8.5 in (44 mm × 483 mm × 215 mm)
Net Weight
5.7 lb (2.6 kg)