ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944
TOA MM-700F Matrix Mixer/Amplifier 1350 W (rated output), 200 W
FEATURES
• 4 stereo-summing line inputs with matrix routing to 4 amplifier outputs.
• Each line input has input level adjustment and assign restriction setting for
each output to prevent routing selection.
• 2 priority MIC/LINE inputs with different priority level for paging or other
pre-recorded source which can override the selected line input on assigned
output channels.
• Each priority input also has input level, mute sensitivity and mute hold
time adjustments.
• Each output channel is equipped with 250W Class-D amplifier at
70V/100V output voltage selectable with independent DSP preset selection
and 50Hz HPF for the protection of connected speakers.(*)
• Selectable DSP preset selections include general EQs, like Loudness
curves, TOA speaker EQs and crossover settings to be used with subwoofers.
• Each output channel also has auxiliary line output to deliver audio to other
systems.
• This matrix doesn’t need any PC programming or network connection for
setup at site. (Maintenance purpose only)
• Optional wall mount remote control, WP-700 can be connected via CAT-5
straight LAN cable to control the line input selection and output volume of
each output.
• Class-D amplifier has various protection features against over current,
high temperature and short circuit of speaker lines at each output channel.(*)
• Power supply with Power Factor Correction for reduced power
consumption and world-wide operating range.(*)
• Option: WP-700-AM Wall Panel
(*) MA-725F only
*0dB=1V
SPECIFICATIONS MA-725F-AM MM-700F-AM
Power Source 100 - 240V AC, 50/60Hz
Power Consumption 1350 W (rated output), 200 W (based on cULus standards), 42.5 W
(idle), 22 W or less (stand-by) 9 W or less
Frequency Response 20Hz - 20 kHz (-3 dB / + 1 dB, LPF OFF) 20Hz - 20 kHz (-3 dB / + 1 dB)
Total Harmonic Distortion
1% or less, at 1kHz, rated output
Certifications cULus 60065, EN60065, EN55032, EN55020, FCC part15 class A
Input Priority 1-2: Mic -60 dB/Line -10 dB* selectable, 2.2 kΩ, electronically-balanced, removable terminal block
Line In 1-4: -10 dB*, 10 kΩ, unbalanced, 2 RCA jacks (Stereo summing)
Output
Speaker 1-4: 70 V (20 Ω), 100 V (40 Ω), removable terminal block --
Line Out 1-4: 0 dB*, 600 Ω, unbalanced, RCA jack 0 dB*, 600 Ω, unbalanced, removable terminal block
MOH: 0 dB*, 600 Ω, transformer balanced, removable terminal block
DSP Preset 16 presets in 4 banks at each output channel, selectable
S/N Ratio Mic: 60 dB* or more, Line: 75 dB* or more (A-weighted)
Muting Manual mute / Automatic mute
Mute Hold Time 50ms - 10 seconds, adjustable
Priority Level PRIORITY 1 > PRIORITY 2 > LINE 1-4
Control
Power: ON/OFF switch, Power remote terminal
Priority 1-2: MIC/LINE selector switch, Gain control, Assign switch, Auto mute switch, Mute sense control, Manual mute terminal, Mute hold time control,
Priority mix switch
Line In 1-4: Gain control, Assign restriction switch
Output 1-4:
LINE IN 1-4 selector switch, Output gain control, 70V/100V selector
switch, HPF switch, DSP bank selector switch, DSP preset selector
switch
LINE IN 1-4 selector switch, Output gain control, DSP bank selector
switch, DSP preset selector switch
Remote 1-4: Remote control connector (RJ-45), Remote link switch
Operating Temperature 0 to 40 °C degree (32 to 104 °F)
Operating Humidity 35% to 80%RH (no condensation)
Finish Panel: Aluminum, hair line, black; Case: Steel plate, black, paint
Dimension 420 (W) x 107.6 (H) x 350 (D) mm (16.54" x 4.24" x 13.78")
Weight 7.6 kg (16.7 lbs) 5.7 kg (12.3 lbs)
Accessories Power cord (2m (5.65ft)) x1, Removable terminal plug (5 pins x 2, 3 pins x 1, 2 pins x 4); Rack mounting bracket x 2, Bracket mounting
screws x 4, User manual x 1
Option Remote Control Panel : WP-700-A