| Type |
Power amplifier |
| Power Requirement |
AC mains, 120 V, 60 Hz |
| Power Consumption |
180 W |
| Output Power |
120 W RMS |
| Power Band Width |
(D) 20 〜 20,000 Hz, 0.5% THD
(T) 50 〜 20,000 Hz, 0.5% THD |
| Frequency Response |
(D) 20 〜 20,000 Hz, ±1 dB
(T) 20 〜 15,000 Hz, ±1 dB, (T) 20 〜 20,000 Hz, +1 dB, -3 dB |
| T.H.D |
0.01% at 1 kHz, rated output |
| Inputs |
One Input Port : Port accepts any input module expect T-01.
One Direct Input
※ Use of direct input prohibits use of modular input port. |
| Input Sensitivity /Impedance |
Input Port : 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input : 100 mV or 1000 mV (switchable)/10 kΩ |
| Outputs(T)=Transformer (D)=Direct |
Main (T) : 8 Ω, 25 and 70 volts, balanced
Main (D) : 4 Ω, unbalanced |
| Output Regulation(1kHz) |
(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load |
| S/N Ratio(Band Pass 20 〜 20,000 Hz) |
Input level switch in 0 dBV (1000 mV) position : 108 dB
Input level switch in -20 dBV (100 mV) position : 90 dB |
| Controls |
1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch |
| Indicators |
1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED |
| Protection |
Self-protection, with AC fuse (inside) |
| Connectors |
Input : Card-edge connector and screw-terminal strip
Output : Screw-terminal strip
AC outlet : 3-pin grounding type
AC power cord/plug : SJT, 3-prong type |
| Temperature Range |
-10℃ 〜 +60℃ (12゜F 〜 140゜F) |
| Finish |
Black |
| Dimensions(W×H×D) |
420(16.54") × 99.1(3.90") × 358(14.09") mm |
| Weight |
10.9 kg (24.03 lb.) |
| Accessory |
Volume control cover (YA-920)……1 |
| Option |
Rack mounting bracket (MB-25B) |
