ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

Crown XLS 802D เพาเวอร์แอมป์ เครื่องขยายเสียง Power Amplifier 1,050W/ch @ 2 ohms, 800W/ch @ 4 ohms, 500W/ch @ 8 ohms, 1,600W bridged mono @ 8 ohms. Designed to provide the quality, power,

OVERVIEW

Crown remains at the front of the power amp pack with their XLS Series!
1,050W/ch @ 2 ohms, 800W/ch @ 4 ohms, 500W/ch @ 8 ohms, 1,600W bridged mono @ 8 ohms. Designed to provide the quality, power, and reliability you expect from other Crown amps with many of the same controls and features for a much friendlier price. 

Features sophisticated protection circuitry (from shorted, open, or mismatched loads, input and high frequency overloads), 5-way fault indicator, red LED on each channel that turns on when distortion becomes audible, green signal-present LED that flashes when the level is extremely low (indicating cabling problems), and detented level controls. Mode select switch for stereo or bridged; 3-speed fan; XLR inputs and Speakon or binding post outputs; all in a rugged steel chassis designed to handle serious road use.

FEATURES

·       Features sophisticated protection circuitry

·       5-way fault indicator

·       Red peak clip LED on each channel

·       Green signal-present LED that flashes when the level is extremely low

·       Detented level controls

·       Mode select switch for stereo or bridged

·       3-speed fan

·       XLR inputs

·       Touchproof binding post and Speakon outputs

·       All in a rugged steel chassis designed to handle serious road use

Crown amps are the royalty of the pro audio world. Order now!

SPECIFICATIONS

XLS 802D Power Amplifier

·       Sensitivity (volts RMS) for full rated power at 4 ohms: 1.25 V.

·       Frequency Response (at 1 watt) 22Hz to 20kHz: +0 dB, —0.8dB

·       Signal-to-Noise Ratio (20Hz to 20kHz)_A-weighted, below rated power: _>98dB. _No weighting, below rated power: _>93dB.

·       Total Harmonic Distortion (THD): <0.5%.

·       Intermodulation Distortion (IMD):_(60Hz and 7kHz at 4:1) from full rated output to —40 dB: < 0.3%.

·       Damping Factor (8 ohm) 10Hz to 400Hz: >200.

·       Crosstalk (below rated power)_at 1kHz: —76dB. at 20kHz: —58dB.

·       Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced.

·       Load Impedance: Rated for 2 to 8 ohms per channel in Stereo, 4 to 8 ohms in Bridge Mono.

·       AC Line Voltage and Frequency Configurations Available (±10%): 120 VAC 60Hz, 100 VAC 50/60Hz, 220 VAC 50Hz, and 230-240 VAC

·       29 lb.