ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
CHEVIN S600 POWER AMP เพาเวอร์แอมป์ เครื่องขยายเสียง 600+600 W. @ 4 ohms,1200@ 8 ohm/Bridge
The Chevin S600 is designed to meet every standard for professional amplification.
Its powder coated steel face plates and heavy-duty steel chassis reflect the
manufacturing quality within.
Technical specification
Output Power
Both channels driven, 4 Ohm, 1 kHz, 1 % THD 600 W per channel
Single channel driven, 4 Ohm, 1 kHz, 1 % THD 640 W / channel
Both channels driven, 8 Ohm, 1 kHz, 1 % THD 340 W per channel
Single channel driven, 8 Ohm, 1 kHz, 1 % THD 360 W / channel
Bridge, 8 Ohm, 1 kHz, 1 % THD 1200 W
Distortion, 1 kHz, THD % < 0.02 %
Frequency response
- by 10 dB below nominal power
20 Hz – 20 kHz +0 /-1 dB
20 Hz – 50 kHz +0 /-1 dB
Damping Factor, 8 Ohm, 1kHz > 200
S/n Ratio
S/n Ratio “A“ weighted
- 103 dB
- 112 dB
Input Sensitivity – by nominal power / 8 Ω 1.0 V
Input Impedance balanced 20 kΩ
Slew Rate / 8 Ω 20 V / μS
Subsonic filter On / Off and 40 Hz / 80 Hz
Limiter On / Off
Controls Front: mains switch
volume control (both channels)
Rear: DIP switch – mode selection
BRIDGE switch
Indicators Bridge: yellow LED
Protect, Clip: red LED
Signal: green LED
Power: blue LED
Cooling step switched fan
Protection short-circuit, temperature
Dimensions 483 x 88 x 370 mm
Weight 9.0 kg
Power Requirements AC ~ 230 V / 120V 50 / 60Hz