ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944
CROWN CDi 1000 Solid-State 2-Channel Amplifier 500W Per Channel @ 4 Ohm Dual
The CDi 1000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 1000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.
Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 1000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.
Rugged and lightweight steel construction
Operates in dual or bridge-mono modes
Rack mountable
Excellent sound reproduction with low distortion
Advanced protection circuitry protects against overheating, overloads, and shorts
Switch-mode universal power supply
Wide range of speaker impedances and outputs
Backlit LCD
Integrated DSP
Specs.
Frequency Response 20Hz - 20kHz (@ 1W into 4 Ohms)
Sensitivity 1.4V @ 8 Ohms
Signal to Noise Ratio 100dB
Voltage Gain 30.5dB (@ 1kHz, 8 Ohm Rate Output)
Load Impedance Rated for 2-8 Ohms in Stereo Mode
Rated for 4-16 Ohms in Bridge-Mono Mode
Input Impedance 20 kOhms (Nominal)
Output Power 700W @ 2 Ohm Dual (Per Channel)
500W @ 4 Ohm Dual (Per Channel)
275W @ 8 Ohm Dual (Per Channel)
1400W @ 4 Ohm Bridge-Mono
500W @ 70V Dual (Per Channel)
1000W @ 140V Bridge-Mono
Damping Factor Better than 500 from 20 to 400Hz
Crosstalk >70dB Below Rated Power, 20Hz to 1kHz
Max Input Signal +22dBu Typical
Inputs 2 x 3-Pin Removable Phoenix-Type
Outputs 4-Position Barrier Strip with Connectors for Dual Loudspeakers or Bridge-Mono Loudspeaker
Power 100V, 120V-240V, 50/60 Hz
Dimensions (WxHxD) 19 x 3.5 x 12.25" (483 x 89 x 311mm)
Weight 19 lb (8.6 kg)
