ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

BOSE ESP-88 ControlSpace sound processors DSP

ราคาเครื่องยังไม่รวม controllers

ControlSpace® Systems

ControlSpace systems deliver a comprehensive and expandable DSP solution for multi-purpose facilities. Program the simple, elegant user controls to allow customers to access and operate the system with confidence.

The ControlSpace engineered sound processors offer two levels of DSP performance: up to 32 general-purpose I/O and up to 64 digital audio channels, or up to 32 analog audio channels. Using expansion cards, you can choose standard dynamic range (SDR) systems and enhanced dynamic range (EDR) systems; to increase processing power, add an extra DSP card.

The ESP-88 processor includes a DSP card, two 4x4 mic/line cards and one GPIO card. In this configuration, four audio slots and one GPIO slot are available for expansion.

The ESP-00 signal processor ships with one DSP card and one GPIO card. The depopulated chassis is fully configurable; choose a complement of expansion cards to suit your specific project. Eight audio slots and one GPIO slot are available.

Simple yet powerful end-user controls

The ControlSpace CC-4 room controllers, CC-16 zone controllers and CC-64 control centers provide simple end-user operation of ControlSpace systems. They're capable of managing a complex system, but are easy to use:

Technical audio parameters are replaced with descriptive modes of operation, such as "Sunday Sermon" and "Choir Practice"

Large, easy-to-read LCDs, simple buttons or knobs, and elegant styling are incorporated—the result of significant research in industrial design, ergonomics and usability

Simple-to-use software with Smart Simulation

The ControlSpace® Designer™ software makes it easy to configure and operate ControlSpace systems, and reduces on-site programming time. It lets you observe, verify, iterate and document programming for ControlSpace engineered sound processors, control centers, zone controllers and general-purpose inputs on screen—whether connected to the system hardware or not.

The ControlSpace Designer software uses industry-standard drag-and-drop programming methods familiar to most system designers

The Smart Simulation, featured throughout the program, allows you to see the results of all programming instantly, saving you time

On-screen programmable user controls allow you to establish scene labels with your customers directly, reducing training and increasing confidence in system use