ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
ASHLY ne800 เพาเวอร์แอมป์ เครื่องขยายเสียง 225W/Channel @ 8Ω,400W/Channel @ 4Ω,800W @ 8Ω Bridged
The ne800 from Ashly is a rackmount stereo power amplifier with network capability, ideal for installed audio applications. The amplifier has a 10/100 Ethernet jack that allows you to control and monitor the amplifier's functions over a network with the included Proteane software. The rear panel offers XLR and Euroblock analog inputs, Speakon and Euroblock speaker outputs, and XLR and Euroblock analog Aux outputs.
A blank panel on the rear allows you to install an optional CobraNet CNM-2 card for CobraNet capability, or an AES/EBU input to support digital audio. Other useful amplifier functions include DC voltage control, preset recalls, and remote power standby. LED indicators provide you with at-a-glance knowledge of power, standby, network, protection circuitry, audio levels, operating mode, temperature, and current.
Rackmount Design
The rackmount design allows you to install the amplifier in any standard equipment rack for use in a studio or other venues
Multiple Operating Modes
Choose between stereo or bridged operating modes for flexible performance
SPECIFICATIONS
|
Power Rating
|
225W/Channel @ 8Ω
400W/Channel @ 4Ω
800W @ 8Ω Bridged
|
|
Damping Factor
|
> 250
|
|
Input Sensitivity
|
26 or 32dB, or 1.4V (Switch-Selectable)
|
|
Input Impedance
|
20 kOhms, Balanced
|
|
Gain
|
Variable
|
|
Frequency Response
|
20Hz - 20kHz ±1dB
|
|
Signal-to-Noise Ratio
|
> 98dB
|
|
Total Harmonic Distortion (THD)
|
< 0.5%
|
|
Connectors
|
2 x XLR Inputs
2 x Euroblock Inputs
2 x XLR Aux Outputs
1 x Euroblock Aux Output
2 x Speakon Outputs
1 x Euroblock Speaker Output
1 x 10/100 Ethernet Port
1 x Remote Euroblock Connector
1 x Input Expansion Slot
1 x AC Power Input
|
|
Controls
|
1 x Power Switch
2 x Level Control Knobs
1 x Mode Selector Switch
1 x High Pass Filter Switch
1 x Sensitivity Selector Switch
|
|
Indicators
|
2 x 4-Segment Level/Clip LED Meters
2 x Temperature LEDs
2 x Current LEDs
1 x Bridge LED
1 x Power LED
1 x Standby LED
1 x Protect LED
1 x Power Switch Disable LED
1 x COM LED
|
|
Cooling
|
Variable-Speed Fan, Front-to-Back Airflow
|
|
Power Consumption
|
0.5A, 35W (1/8 Idle)
|
|
Power Requirements
|
100-220VAC
|
|
Dimensions (HxWxD)
|
3.5 x 19 x 15.5" (89 x 483 x 392mm)
|
|
Weight
|
21 lbs (9.5kg)
|
