ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

Shure SLX14/WB98H-C ชุดไมค์ลอยเดี่ยวสำหรับ แซ็กโซโฟน Instrument Wireless  Microphones UHF ไมโครโฟนจับเสียง แซ็กโซโฟน

Shure SLX14/WB98H-C  ชุดไมค์ลอยเดี่ยวสำหรับ แซ็กโซโฟน

SLX14 ประกอบด้วย SLX4 Diversity Receiver 1 เครื่อง และ SLX1 Bodypack Transmitter 1 ตัว

SLX1 Bodypack Transmitter

The reliable SLX1 wireless bodypack transmitter is designed to hold up to the most adverse conditions. SLX1 can be used in a variety of SLX Wireless systems, including Lavalier, Headworn, Guitar/Bass, Instrument, and Combo.

Automatic Transmitter Setup

Backlit LCD with timeout feature

Frequency and power lockout

3-segment battery fuel gauge

2 AA batteries (included) provide 8 hours continuous use

470 - 782 MHz operating range

Dimensions: 108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")

SLX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.

SPECIFICATIONS

• Audio Input Level -10 dBV maximum at mic gain position +10 dBV maximum at 0 dB gain position +20 dBV maximum at -10 dB gain position
• Gain Adjustment Range 30dB
• Input Impedance 1 megohm
• RF Transmitter Output 30 mW maximum (dependent on applicable country regulations) Dimensions 108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
• Weight 81 grams (3 oz.) without batteries
• Housing Molded ABS case
• Power Requirements 2 AA size alkaline or rechargeable batteries
• Battery Life >8 hours (alkaline)
• SLX4 Diversity Receiver
• Available Options
• SLX4 Diversity Receiver 
• SLX4L Diversity Receiver w/ Logic Output

The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.

With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Model SLX4L is available with logic output for use with software echo cancellation and remote battery life monitoring. Logic-enabled transmitters include MX690 and MX890. 

FEATURES

• SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
• Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)

SPECIFICATIONS

• Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
• XLR connector (into 600 Ohm load): –13 dBV 
• 1/4 inch connector (into 3000 Ohm load): –2 dBV
• Output Impedance 
• XLR connector: 200 Ohms 
• 1/4 inch connector: 1 kilohm
• XLR output 
• Impedance balanced 
• Pin 1: Ground (cable shield) 
• Pin 2: Audio 
• Pin 3: No Audio
• Sensitivity -105 dBm for 12 dB SINAD, typical
• Image Rejection >70 dB, typical
• Power Requirements 12 to 18 Vdc at 150 mA, supplied by external power supply
• Dimensions 42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
• Weight 816 g (1 lb. 13 oz.)
• Housing Galvanized steel

WB98H/C Instrument Microphone

ShureThe Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

TypeCondenser (electret bias)

•  Frequency Response20 to 20,000 Hz(measured at 304.8 mm [1 ft] from a spherical sound source, free field conditions)
•  Polar PatternSupercardioid (as supplied), uniform with frequency, symmetrical about axis. Cartridge for cardioid polar pattern also available.
•  Output Level (at 1,000 Hz)
• Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical*1 Pa = 94 dB SPL
•  Maximum SPL(20 Hz to 20 kHz, less than 1% THD)2.5 kilohm load: 160 dB1 kilohm load: 156 dB
• Preamplifier Output Clipping Level(20 Hz to 20 kHz, less than 1% THD)2.5 kilohm load: + 6 dBV (2.0 V)
• 1 kilohm load: + 2 dBV (1.26 V)
• Dynamic Range(at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load)125 dB (max SPL minus A-weighted noise)
•  Output Noise35 dB SPL, A-weighted
• Signal-to-Noise Ratio59 dB re 94 dB SPL
•  Output ImpedanceRated at 150 ohms (actual)
• Recommended minimum load impedance: 1 kilohmHum Pickup-7.5 dB equivalent SPL in 1 mOe field (60Hz)
• PolarityPositive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Phantom Power48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3.
• CableBETA 98/S: 7.6 m (25 ft) light-weight, two-conductor shielded, TA4F to TA3F mini connectors.BETA 98D/S: 4.6 m (15 ft) heavy-duty, two-conductor shielded, TA4F to TA3F mini connectors.
• Case
• Microphone: Matte black enamel brass case and stainless steel inner grille
• Preamplifier: Matte black enamel finished steel
• DimensionsMicrophone: 11.7 mm X 35.6 mm (0.46 in. X 1.40 in.)Preamplifier: 20 mm X 99 mm (0.79 in. X 3.89 in.)
•  Net Weight
• Microphone: 12 g (0.4 oz) less cable
• Preamplifier: 96 g (3.4 oz)