ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

MCE 86 S II Electret condenser shotgun microphone for battery- or phantom power

Application

Professional cameras

Camcorder, DAT, MD-recorders

Interviewing

Multipurpose halls

Lecterns

Miking choirs

The MCE 86 II shotgun microphones can be used for video recordings, lecterns or theatre applications. The microphones are extremely light and rugged and therefore ideal for mounting onto cameras or camcorders. They can be used for outdoor applications and in studios with fish pole booms or as handhelds.

The electrostatic transducer element and the hypercardioid/lobe polar pattern result in an excellent polar pattern with high sensitivity. Due to its construction and integrated active filter the microphone is insensitive towards wind and vibrations caused by zoom motors. Each sound source is reproduced absolute clearly. The MCE 86 II can be powered from balanced phantom source. If phantom power is not available the MCE 86 II S version should be used. This microphone can be phantom powered or battery powered with an integrated 1.5 V battery. The MCE 86 S II can also be connected to unbalanced XLR or mini jack inputs. It is powered by an 1.5 V battery. Each MCE 86 II version has an electronic balanced output, allowing the operation with long cables.

All battery powered versions have an On/Off-switch and battery condition LED. The average battery expectancy is 80 hours. There are two different elastic suspensions available suppressing footfall sound or vibrations of zoom motors. The EA 86 elastic suspension can be mounted directly onto the camera. At its bottom the EA 86 has a 3/8" internal thread for the mounting on stands or fish pole booms.

The flash-holder adapter BS 86 allows optimal positioning on every camera. The EA 19/25 is supplied with the MKV 11 microphone clamp and enables the mounting on standard stands or fish pole booms with 3/8"thread.

Features

High sensitivity

Excellent off-axis rejection

Rugged yet lightweight design

Non-glare durable polymer coating

Technical Specifications  

• Transducer type Condenser (back electret)
• Operating principle Pressure gradient
• Polar pattern Hypercardioid/lobe
• Open circuit voltage at 1 kHz (0dB = 1V/Pa) 30 mV/Pa
• Nominal impedance 150 Ω
• Load impedance ≥ 1 kΩ
• Length 253 mm (MCE 86 II) / 310 mm ((MCE 86 S II)
• Shaft diameter 25 mm / 21 mm
• Weight without cable 92 g (MCE 86 II) / 120 g ((MCE 86 S II)
• Frequency response 50 - 18,000 Hz
• Max. SPL at 1 kHz 128 dB
• S/N ratio rel. to 1 Pa > 61 dB
• Supply voltage 1.5 V Battery / 11 - 52 V phantom power
• Variant MCE 86 II, MCE 86 S II CAM