ราคาพิเศษ สอบถามโทร 080-6144774,02-9810944

Audio-technica AT4041SP Studio Microphone Pack

The AT4041 outperforms mics twice its price! Its warm, delicate, sweet sound makes recordings spring to life. It's ideal for drum overheads, acoustic guitar, piano, horns and under snares. The AT4041 Studio Pack offers two AT4041 studio mics with a pair of stand clams, two windscreens, and a protective vinyl storage case.

This premium electret condenser microphone is engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound. The AT4041 cardioid studio condenser microphone features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. A unique combination of audio excellence and moderate cost, the AT4041 is a rugged microphone housed in a case of turned brass with black chrome plating for durability and low reflectivity. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

Features:

Recommended for professional recording and critical applications in broadcast

Smooth, extended frequency response, high output and very high SPL capability 

Transformerless design for low self-noise 

Switchable highpass filter and rugged turned-brass microphone housing 

Frequency response 20Hz-20kHz

100 ohms impedance

Element - fixed-charge, permanently polarized capacitor

Polar Pattern - cardioid

Dynamic range, typical - 121dB, 1kHz at max SPL

Signal-to-noise ratio, typical - 70dB

Phantom Powered - 48-volt DC

Two AT4041 cardioid condenser microphones 

Two AT8405a stand clamps 

Two AT8159 windscreens 

Protective vinyl case

Specification Detail

Microphone Type Condenser

Polar Pattern Cardioid

Frequency Response 20Hz-20kHz

Max SPL 145dB SPL (1kHz at 1% THD)

Output Impedance 100 ohms

Signal to Noise Ratio 70dB, 1kHz at 1 Pa

Low Cut Filter 80Hz, -12dB/octave

Pads No Pad

Connector XLR

Weight .26 lb.

Manufacturer Part Number AT4041SP