ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

DENON DN-C680 เครื่องเล่น cd แบบติดตู้แร็ค CD player for studio and broadcast production 

HighlightsIndex SearchAuto Space

Auto Edit Display of Playback Locations

CD-R Reading Capability

Features

Index Search

The Select knob can be used to perform an Index Search when the INDEX button is ON (the LED on the INDEX button lights up).

Auto Space

During playback, it is possible to insert a silent space of about 4 seconds between tracks. To do this, simply press the AUTO SPACE button to ON (the LED on the AUTO SPACE button lights up).

Auto Edit

This function automatically divides the total recorded time on the disc in half and rearranges the tracks so that they fit neatly onto the A and B sides of a cassette tape.

Display of Playback Locations

A bar graph display indicates playback points on the track being played. Elapsed time and Remaining time displays are switched using the TIME button.

CD-R Reading Capability

DN-C680 reads CD-R discs with or without Table Of Contents (Note: some CD-Rs without TOC might not be readable)

19-inch Rack Mountable (Height: 3U)

Large FL Display, Illuminated Rubber Buttons

Track Search Select Knob (Easy track selection)

Jog Dial/Shuttle Wheel

Perform searches to 1 MD frame precision using the jog dial and easy scans using the shuttle ring.

Program Play (Max. 25 tracks)

When the PLAY mode is set to Single, the player stands by at the beginning of next track (at Finish mode "NEXT").

When the PLAY mode is set to Continuous, the playback is continued according to your programmed sequence.

Play mode & Finish mode

Play mode

Continuous: Play a whole disc

Single: Play a track

A-B: Play an A-B loop

Finish mode (Stop, Next, Recue)

*only when Single Track play is selected

Stop: Stops at the end of the track

Next: Standby at the beginning of the next track after when the selected track is played

Recue: After the selected track has played, the unit will standby at the beginning of that selected track

Auto Cue

After a track is selected, it is automatically cued to the point where audio starts. Cueing takes place at the point where audio starts rather than where the track starts. The level at which sound is first detected can be set between -36 to -72 dB (7 steps).

End Monitor

Pressing the END MON button during standby instantly previews the end of the track, thus assuring perfect "outros". The point at which monitoring starts can be set within a range of 5 to 35 seconds (7 steps) prior to the track's end.

End Of Message (EOM)

At the end of a track, the PLAY/PAUSE button flashes, providing a visual warning to the operator that the track will end shortly. The point at which the flashing begins can be set within a range of 0 to 30 seconds (7 steps) prior to the end of the track.

Pitch Control (±9.9%, 0.1% step)

Instant Start (Playback starts less than 0.01 seconds after the PLAY button is pressed.)

External Control Terminals

Serial Remote (RS-232C/RS-422A switchable, D-Sub 9-pin)

Parallel Remote (D-Sub 25-pin) optional RC-680 remote

Sampling Rate Convertor Unit: ACD-25FSC (Option)

Digital output is possible at 32 and 48 kHz as well as 44.1 kHz.

SMPTE Time Code Sync Unit: ACD-27CS (Option)

Conforming to IEC-461, LTC (Longitudinal Time Code) format

Time Code Chase Search

Video Sync or Word Sync is selected in Preset mode.

The Word Sync signal supports 44.1 kHz ±1.0%. 

Specifications

• Type
• Rack Mountable CD Player
• Audio Channel 2 channels (Playback: Stereo/Mono selectable)
• Digital filter 18-bit 8-times oversampling 
• Digital filter D/A Converter Dual 18-bit linear
• Sampling Frequency 44.1 kHz (32/48 kHz available  using optional ACD-25FSC)
• Total Harmonic Distortion ≤0.003%
• S/N ratio ≥105 dB (A-weighted)
• Channel Separation ≥100 dB
• Frequency Response 5 Hz - 20 kHz ±1 dB Analog output (1 kHz, 0 dB playback)
• Transfer and connector Balanced active, XLR connector *1 Unbalanced, RCA connector
• Output level Balanced: +18 dBm (±0.5 dBm), 600 ohm Unbalanced: 2 V, 10 kohm
• Output level adj. range +22 dBs to -20 dBm (Balanced)
• Headphone output 20 mW (30 to 40 ohm)

Digital output 

• Transfer and connector
• Balanced active, XLR connector
• Unbalanced, RCA connector
• Signal format
• AES/EBU or IEC-958 Type 2 or SPDIF
• Output level
• Balanced: 3 Vp-p, 110 ohm
• Unbalanced: 0.5 Vp-p, 75 ohm
• Serial Remote
• RS-232C/RS-422A (Switchable),
• D-Sub 9-pin
• Parallel Remote
• D-Sub 25-pin for optional
• RC-680 remote

General

• Power Supply AC 120V, 60 Hz
• Power Consumption 19 W
• Dimensions 483 (W) x 132 (H) x 297 (D) mm 19 (W) x 8.8 (H) x 11.7 (D) inches
• Weight 6.5 kg (14.3 lbs)
•