TANNOY CVS6 ลำโพงติดเพดาน Ceiling Monitor 2 Way Speaker,
Coaxial speaker 6" (150 mm), 120 w 8 Ohms, transformer 70 - 100 v selectable 60/ 30/ 15 w, 79 Hz - 21Khz, 91 dB, White, paintable grille
An integral low insertion loss 60W line transformer uses an easily accessible front baffle mounted rotary tapping switch to select between low impedance and 70V or 100V operation:
70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance operation.
Security toggle clamps make for quick and easy installation, while two tile support rails and one C-ring are also included in the package. A plaster (mud) ring is available as an optional accessory.
The CVS6 is supplied with an integral zinc-plated steel back can, with recessed termination box, the removable locking connector has screw terminals for secure wire termination and "loop through" facility. Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.
The Tannoy CVS6 is a full bandwidth ceiling speaker system comprising a 160mm (6.00") mid bass driver with a coaxially mounted 19mm (0.75") high frequency section. The mineral loaded polypropylene cone material and nitrile rubber surround enhance durability and long-term reliability.
The drive unit is mounted in a vented, injection moulded, paintable front baffle manufactured from UV / weather resistant UL94V-0 ABS material
| CVS6 |
| PERFORMANCE |
| Frequency Response (-3dB) (1) |
79Hz - 21kHz |
| Frequency Range (-10dB) (1) |
60Hz - 24kHz |
| System Sensitivity (1W @1m) (2) |
91dB (1W = 2.45V for 6 Ohms) |
| Nominal Coverage Angle |
90 degrees conical |
| Coverage Angle (1kHz to 6kHz) |
93 degrees conical |
| Directivity Factor (Q) |
7.7 averaged 1kHz to 6kHz |
| Directivity Index (DI) |
8 averaged 1kHz to 6kHz |
| Rated Maximum SPL |
Average:109dB
Peak: 115dB |
| Power Handling (3) |
Average: 60W
Programme: 120W
Peak: 240W |
| Recommended Amplifier Power |
120W @ 6 Ohms |
| Nominal Impedance |
6 Ohms |
| Transformer Taps (via front rotary switch) |
70V: 60W / 30W / 15W / 7.5W / OFF & low impedance operation
100V: 60W / 30W / 15W / OFF & low impedance operation |
| Crossover |
2.5kHz |
| TRANSDUCERS |
| Low Frequency |
150mm (6.00") mineral loaded cone |
| High Frequency |
19mm (0.75") coaxially mounted |
| PHYSICAL |
| Enclosure |
Back Can: Zinc plated steel
Baffle: Reflex loaded UL 94V-0 rated ABS
Grille: Steel, with weather resistant coating |
| Safety Features |
Safety ring located at rear of enclosure for load bearing safety bond |
| Clamping Design |
Security toggle clamp |
| Cable Entry Options |
Cable clamp & squeeze connector for conduit up to 22mm |
| Connectors |
Removable locking connector with screw terminals with "loop through" facility |
| Safety Agency Ratings (pending) |
UL-1480, UL-2043, CE |
| Hole Cutout Diameter |
250mm (9.84") |
| Dimensions |
Bezel diameter: 279.5mm (11.01”)
Front of ceiling to rear of back can: 246.5mm (9.70”)
Front of ceiling to top of safety loop: 258.5mm (10.18”) |
| Net Weight (ea) |
4.75kg |
| Included Accessories |
C Ring
Tile bridge
Paint mask
Cutout template
Grille |
| Optional Accessories |
Plaster (mud) ring |
