ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944
QSC AD-C81TW ลำโพงติดเพดาน ติดฝ้า Ceiling Mount Subwoofer System(white),8” woofer polypropylene cone,70/100
The QSC AD-C81TW Ceiling Mount Subwoofer System (White) is designed to supplement audio systems with low-frequency extension--it's acoustically matched to the entire AD Series. The AD-C81TW is rated for 100 watts continuous power handling and can take up to 400-watt peaks.
The AD-C81Tw has an 8" woofer with a polypropylene cone for protection in humid environments. The driver has a synthetic rubber surround and works optimally with the large port to deliver excellent low frequency extension below 40 Hz without undesirable port turbulence. It also features a built-in passive low pass filter set at 120 Hz. The filter is defeatable from the front baffle to allow the use of outboard crossovers. The AD-C81Tw is equipped with a 70/100V transformer with multiple taps and an 8-ohm bypass.
8" polypropylene cone woofer
Large port area for extended low-frequency performance
Defeatable passive 120 Hz low-pass filter with impedance compensation
100 watts continuous power handling, 400 watts peak
70/100 V multitap transformer with 8 ohm bypass
C-ring and tile rails included
Side cable entry
FEATURES
- 8" polypropylene cone woofer
- Large port area for extended low-frequency performance
- Defeatable passive 120 Hz low-pass filter with impedance compensation
- 100 watts continuous power handling, 400 watts peak
- 70/100 V multitap transformer with 8 ohm bypass
- C-ring and tile rails included
- Side cable entry
Package Includes:
1 qty. AD-C81Tw loudspeaker
1 qty. C-ring and tile rails
1 qty. Round grille (white, paintable)
1 qty. Paint mask
1 qty Connector assembly
SPECIFICATIONS
|
AD-C81Tw
|
Configuration
|
Ceiling subwoofer, ported
|
Low-frequency Transducer
|
8" (20 cm) weather resistant, polypropylene cone woofer, rubber surround
|
Frequency Range 1
Frequency Response (-6 dB)
Useable Frequency Range (-10 dB)
|
39 Hz - 184 Hz
28 Hz - 208 Hz
|
Filter
|
120 Hz low pass, passive, bypassable
|
Maximum Output 2
Calculated Peak Output
Calculated Continuous Output
|
118 dB SPL
112 dB SPL
|
Nominal Impedance
|
8 ohms switchable
|
Power Rating
RMS Power Handling3
Recommended Max Amp Power
|
100 W (100 hours IEC)
200 W RMS
|
Sensitivity
|
92 dB, 2.83 V, 1 m, free space (4pi)
|
TRANSFORMERS
|
Type
|
Custom low distortion laminated core, wide bandwidth design
|
Taps
|
70 V: 60, 30, 15, 7.5 W / 100 V: 60, 30, 15 W / 8 ohms selected by switch
|
Environmental
|
Exceeds Mil Spec 810 for humidity, salt spray and dust; IEC 60529 IP-X3 splash rating
|
Agency Rating
|
Listed UL1480, UL2043 safe for use in air handling spaces; Transformer is Listed UL1876; Compliant BS/EN 60849 safety standards
|
ENCLOSURE
|
Material
|
Injection molded, high impact polystyrene baffle on a steel enclosure
|
Finish
|
White (paintable)
|
Grille
|
Painted aluminum
|
Connectors
|
Ceramic block or 4-pin Euro terminals in fire protective sub-chamber
|
Mounting Hardware
|
Rails and C-ring for ceiling tile installation
|
Weight
|
20 lb (9.1 kg) Net
28 lb (12.7 kg) Shipping
|
Available Accessories
|
ADC-MRS Mud ring bracket • ADC-NCS New construction bracket
|