Input Channels
Microphone Input Electronically Balanced
Frequency Response: 20 Hz to 20 kHz, +/-1 dB
Distortion: ( THD&N) <0.03% at 0 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
SNR (Signal-to-Noise Ratio): 114 dB
Line Input Electronically Balanced (Unbalanced)
Frequency Response: 20 Hz to 20 kHz, +/-1 dB
Distortion: (THD&N) <0.03% at 0 dBu, 1 kHz
Gain range: -15 dBu to 35 dBu
Impedance Microphone Input: 1.4 kOhms
Channel Insert return: 2.5 kOhms
All Other Input: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms
Equalization
Hi Shelving: ±15 dB @12 kHz
Mid bell: ±12 dB @ 100 Hz - 8 kHz
Low shelving: ±15 dB @80 Hz
MAIN EQ: 9 EQ (63 Hz, 125 Hz, 250 Hz, 500 Hz ,1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz) ±15 dB
DSP Section: 24-bit A/D and D/A converters
DSP Resolution: 24-bit
Type of effects: Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono Echo, Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb + Delay, Thickener
Presets: 16
Controls: 16-Posistion preset selector
Clip LED
Mute switch with peak LED Indicator
Main Mix Section Noise (Bus noise)
Fader 0 dB, Channels muted: -94 dBu
Fader 0 dB, All input channels assigned and set to unity gain: -92 dBu
Phantom Power: Mic Pin 2 / Pin 3 and Pin 1 +48 V - Switched
Power supply main voltage: 100 V - 230 V
