ราคาพิเศษ สอบถามโทร 080-6144774 ,02-9810944

TANNOY VQNET LIVE60 Passive 12" x 2 Three-Way ลำโพงสามทาง 12 นิ้ว x 2 ทนกำลังขับสูงสุด 800W @ 8Ohm

The VQ NET 60 LIVE is a full range, three-way loudspeaker system designed for rental/hire applications which require very high output capability with class leading pattern control. Integrated with cutting edge digital signal processing, network control and dual channel Class D amplification, the VQ NET 60 LIVE is perfectly suited for use in arrays or singly in wide range of demanding situations.

Offering significant and tangible benefits over many existing solutions: sonic superiority, less boxes required, lower costs and full VNET implementation (allowing system setup and ongoing venue network control, incorporating real time diagnostics), VQ LIVE has the potential to be a true line array killer.

Each VQ NET 60 LIVE comes with ‘easy-lock’ wheel-board (‘dolly’) for easy transit on/off site as well as refined ergonomic handle grips. The cabinet design allows for side-by-side rigging and flying with the dedicated hardware (optional). Each unit also comes with protective transit covers.

With effective low frequency extension to 90Hz, a VQ LIVE system can be augmented with the perfectly matched VNET LIVE subwoofer enclosures for a true full-range live performance system.

Companies will be able to make substantial savings when purchasing VQ LIVE and could certainly purchase a new system on the proceeds from selling old equipment alone – perhaps a more pertinent and critical factor in the current climate than it has been in the past.  With a continuous SPL of 138db (144db max), industry-leading coverage and pattern control not to mention a remarkable amount of rear rejection and an innovative wheeled dolly system for simple transit and venue setup.

Features 

• Road-ready
• Unrivalled Clarity
• True Constant Directivity
• Predictable, tightly controlled high SPL Coverage
• Excellent Phase Coherence
• Less boxes required, less cost
• Extremely high sensitivity, 138dB (144dB peak) sustained output
• Ergonomic cabinet design and dolly board for easy transit and rigging
• VNET™ implementation – real-time diagnostics and remote commissioning
• Protective travel covers included
• Applications 
• Corporate AV
• Live Music / Performance Venues
• Performing Arts Spaces
• Portable PA
• Sports Arenas / Stadia

Specifications 

• PERFORMANCE
• System Type 3-Way Full Range - Point Source
• Frequency Response (-3dB) 1 115Hz - 23kHz
• Frequency Range (-10dB) 1 90Hz - 27kHz
• Dispersion (-6dB) 60 degrees conical
• Driver Complement  
• LF 2 x 300mm (12.00”) LF Transducers, Semi Horn Loaded
• MF/HF Dual Concentric™ Compression driver loaded into a single PSW™ Waveguide
• Crossover Frequency 450Hz (DSP Generated) 7kHz (passive)
• Directivity Factor (Q) 21.2 averaged 1kHz to 10kHz
• Directivity Index (DI) 13.3 averaged 1kHz to 10kHz
• Rated Maximum SPL LF 134dB (average) 140dB (peak)MF/HF 138dB (average) 144dB (peak)
• Notes 1. Average over stated bandwidth. Measured at 3 metres on axis, then referred to 1 metre
•   2. Unweighted pink noise input, measured at 3 metres in an anechoic chamber, then referred to 1 metre
•   A full range of measurements, performance data, and Ease™ Data can be downloaded from www.tannoy.com

  Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notification

Construction  

• Enclosure 18mm (0.71") birch plywood. Vented and internally braced.
• Finish Textured black paint.
•   Powder coated perforated steel grille
• Connectors 1 x female XLR (input)
•   1 x male XLR (link)
•   1 x RJ45 (network in)
•   1x RJ45 (network link)
•   1 x Neutrik Powercon
•   1 x Powercon OUT
• Controls & Indicators LED on front of cabinet behind grille. 
•   Power LED (blue)
•   Signal LED (green)
•   Limit LED (red)
•   User DSP - defeat switch
•   Power switch
• Fittings 8 x Recessed carrying handles
•   12 x M10 flying inserts
•   Coupling bracket inserts for aligning devices in clusters
• Dimensions 925mm x 620mm x 502mm (36.42" x 24.41" x 19.76")
• Weight 86.5Kg (98.5Kg with dolly)
• Electronics  
• Efficiency >85% typically
• Damping Factor 120 ref 8 Ohms
• Distortion <0.05% @ 1kHz -3dB output (22kHz bandwidth)
• Input Impedance 5.6kOhms unbalanced, 11.2kOhms balanced
• Output Power (Programme) LF - 800W 
•   MF/HF - 800W (limited to 400W)
• Input Sensitivity 1.4V ( 5.5dBu)
• System Type Dual channel Class D
• DSP system  
• Comms Facilities Firmware updatable and selected parameters editable
• Communications Serial - RS485 Proprietary message format
• Dynamic Range 112dB(A) typical
• DSP 3rd generation SHARC
• Sampling Frequency 96kHz 24 bit A/D-D/A word length
• Format 1 IN - 2 OUT

PSU Specifications  

• Input Connector Locking Neutrik Powercon
• Voltage Selection Automatic (115 / 230V, 45 - 65Hz)
• Type High current, high frequency switch mode
• Efficiency >90% typical
• Input voltage 100v / 115v / 230v nominal /-10%
• Mains fuse External
• Fuse type T10AT
• Other features Automatic soft start
• Current Draw 115V                     230V
• Startup (inrush) 3.5A                                 1.9A
• idle 1.0A                                  0.56A
• In PowerSave Mode  
• Max 3.5A                                 1.7A