| Nominal Coverage |
90° horizontal x +20 to -30° vertical |
| Frequency Range |
37 Hz – 16 kHz (-6 dB) |
| Crossover Frequency |
300Hz, 24 dB per octave in bi-amp mode |
| |
LF-2215 |
MH-1060X |
| Impedance |
4 ohms |
8 ohms |
| Sensitivity 1 watt/1 meter, half space |
98 dB |
103.5 dB (bi-amp) |
98 dB (passive) |
|
Rated Noise Power
2 hours of 6 dB crest factor pink noise
Recommended Amplifier Power
|
600 W1
450 W to 1200 W
|
200 W2
150 W to 400 W
|
600 W3
500 W to 1200 W, with subsonic
filter in passive mode
|
| Recommended Processing |
Subsonic filter below 30 Hz, > 18 dB per octave |
4th order LR crossover at 300Hz via QSC processor in bi-amp mode |
| Connectors and Controls |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
Barrier strip screw terminals accept up to #10 AWG stranded wire and passive/bi-amp selector switch |
| Transducers |
Two 15-inch (381 mm) high efficiency, extended bass woofers featuring 3-inch copper voice coils |
10-inch high efficiency mid range, 1.4-inch (36mm) exit, 2.4-inch titanium diaphragm compression driver |
| Enclosure |
Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal resistant woofer mounting bolts |
Tilt/Pan Bracket
±10° vertical tilt
±10° horizontal pan |
| Dimensions (HWD) |
908 mm x 762 mm x 516 mm (35.75 in x 30 in x 20.3 in) |
990 mm x 762 mm x 508 mm (39 in x 30 in x 20 in) |
| Weight – Net |
78 kg (172 lb) |
37.2 kg (82 lb) |
| System Weight |
115 kg (254 lb) |
