| I/O |
Maximum Input Capacity: 288
Maximum Output Capacity: 294
Primary Inputs: 80
Return Inputs: 8
Maximum simultaneous mix channels: 104
Number of groups/auxes: 16
Number of matrices: 16
Groups that provide mixes in monitor mode: 32
Mix buses: 35
VCAs: 10
POPulation groups: 6
Effects devices: 8
Maximum Klark Teknik Teknik DN370: 36
Configurable ‘area B’: yes |
| Expandability |
Digital snake: dual redundant HyperMac (192 x 192) Cat 53 digital snake included
Fiber-optic connections for optional maximum 500 m snake Additional I/O options:
DL251 Audio System I/O
DL351 Modular I/O
DL431 Mic Splitter
DL451 Modular I/OI/O Card Options
DL441 analog input (mic module)
DL442 analog output module
DL443 analog jack I/O module
DL444 8 analog mic in and 8 analog line out module
DL452 AES/EBU input and output module
Option of 150 m fiber optic cable |
| Processor |
32-bit |
| Reverb |
Hall, Plate, Chamber and Room, with five variations of each |
| Effects |
Live, Non-Linear, Reverse, Delay, ADT, Multitap Echo, Sound-On-Sound and Infinite Room |
| Parameters |
Pre-delay: 0 to 990 ms
Pattern (density) Adjustable 0 to 9 increments (Grainy to Dense)
Level (depth) Adjustable 0 to 9 increments (Distant to Close)
Decay time 0.1 to 18 seconds
Room size 8 to 90 meters linear dimension
LF decay Adjustable ±7 increments ref. 1 kHz decay time
HF decay Adjustable ±7 increments ref. 1 kHz decay time |
| Controls |
Input mute: Removes audio feed from reverberation section. Reverb mute: Clears unwanted reverberant signal.
Input level control: From 6dB gain to infinite attenuation.
Headroom indicator: 10-point LED display, 0 dB to -27 dB.
Display” Simultaneous display of all parameter information. Parameter selection and store functions are verified by individual LEDs |
| Sampling Frequency |
96 kHz |
| Latency Delay |
<2 ms input to master (no compensation) |
| Dynamic Range |
110 dB, 22 to 22,000 Hz (no pre-emphasis) |
| Maximum Voltage Gain |
80 dB inputs to subgroups and masters
86 dB inputs to aux and matrix |
| Maximum Voltage Gain |
80 dB inputs to subgroups and masters
86 dB inputs to aux and matrix |
| Crosstalk |
At 1 kHz: -100 dB physically adjacent input channels ,b>At 10 kHz: -100 dB physically adjacent input channels |
| Cut and Mix Transitions |
Fader/pan cut off at 1 kHz: -100 dB
Fader/pan cut off at 10 kHz: -100 dB |
| Display Screen |
2x 15″ daylight-viewable color screens |
| LCD |
33x RGB color |
| Faders |
29x touch-sensitive faders with 1024 steps of resolution |
| Encoders |
102x touch-sensitive with 512 steps |
| Power Requirements |
100 to 240 VAC, 50 to 60 Hz |
| Operating Temperature |
41 to 104°F (+5 to 40° C) |
| Storage Temperature |
-4 to 140° (-20 to 60°C) |
| Dimensions |
Control Center: 51.18 x 39.37 x 15.75″ (1300 x 1000 x 400 mm)
Accessories (sold separately)
DL251 I/O Box (5U): 19.0 x 17.5 x 16.1″ (48.3 x 44.5 x 41.0 mm)
DL351 I/O Box (7U): 19.0 x 24.5 x 16.1″ (48.3 x 62.2 x 41.0 mm)
DL371 I/O Box (7U): 19.0 x 24.5 x 16.1″ (48.3 x 62.2 x 41.0 mm)
DL451 I/O Box (3U): 19.0 x 10.5 x 16.1″ (48.3 x 26.7 x 41.0 mm)
|
| Weight |
Control center: 265 lb (120 kg)
Accessories (sold separately)
DL351: 110 lb (50 kg)
DL371: 66 lb (30 kg)
DL451: 29 lb (13 kg)
|
