ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
YAMAHA MA2030 Mixer Amplifer Class D 3 stereo I/P and 2 Microphone I/P 1U Half Rack Power Amplifier / 30 x 30 watt(Lo-z) / 60 watt(Hi-Z)
Designed for Effortless Everyday Use The MA2030 Mixer Amplifier and PA2030 Power Amplifier feature interfaces that have been specifically designed for effortless operation. A layout that gives priority to the frequently used output volume knob while other controls are visually subdued, for example, significantly enhances control efficiency in normal day-to-day operation. And there’s no need for computers or complex programming procedures for installation or operation. After a quick, easy setup procedure that requires no special knowledge or skill, the system is ready to deliver outstanding sound in a wide range of applications. Yamaha DSP Features for Enhanced Music and Microphone Operation The MA2030 packs years of experience and commercial audio know-how into a compact but powerful amplifier that is protected by a rugged metal chassis. 3 stereo inputs and 2 microphone inputs (XLR combo jack and Euroblock) provide plenty of input capacity for small installations. Features that contribute to high quality music playback and microphone use include a feedback suppressor that effectively stops feedback that can occur when a microphone picks up sound from the system’s speakers, automatic ducking that smoothly adjusts the background program level when microphone input is detected, and automatic leveling that keeps overall volume constant regardless of changes in source level. Flexible EQ Functions Bass and treble EQ controls on the front panel of the MA2030 are convenient for adjusting the low and high frequency contours of the stereo input source. The source EQ also includes an enhancer function that adds harmonics as necessary for improved sound. In addition to the MA2030 source EQ, the MA2030 and PA2030 both include speaker EQ that can be selected via a rear-panel DIP switch to provide ideal equalization for Yamaha VXC or VXS series speakers. Supports Lo-Z and Hi-Z Speaker Systems
Both the MA2030 and PA2030 directly support low impedance and high impedance speaker systems without the need for additional transformers or other hardware that can take up valuable installation space. When used to drive a 3Ω or higher low-impedance speaker system (3Ω/4Ω selectable) the amplifiers deliver up to 30W per channel into two channels. With a high-impedance 70V or 100V line connection output is a single channel at up to 60W. That’s ideal output power for a variety of small installations. And since the MA2030 and PA2030 can be used with all Yamaha commercial installation speakers*, you have the choice and flexibility to design a sound system that ideally meets your specific requirements.*Includes the VXS series, VXC series, VS series, S series, NS-AW series and NS-IC series. The S series , NS-AW series and NS-IC series are not available in some regions.
MA2030/PA2030
General specifications
MA2030
Output power
1kHz
THD+N=1%: 3Ω,30W x 2
High impedance: 100V line
60W x 1
High impedance: 70V line
Total harmonic distortion
≤ 0.1% (Stereo in to Speaker out 1kHz, 15W, 3Ω/4Ω), ≤ 0.2% (Stereo in to Speaker out 1kHz, 30W, 70V/100V)
Frequency response
0dB, -2.5dB, +1.0dB (Stereo in to Line out, 20Hz to 20kHz), 0dB, -3.0dB, +1.0dB (Stereo in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω), 0dB, -3.0dB, +1.0dB (Stereo in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V)
Crosstalk
≤ -70dB (Stereo in to other Stereo in)
I/O Connectors
Mic Input
MIC IN 1: XLR combo jack, balanced, MIC IN 2: 3.5mm Euroblock 3-pin, balanced
Stereo Input
ST IN 1: Stereo mini phone (3.5mm), unbalanced, ST IN 2 / ST IN 3: Stereo RCA pin, unbalanced
Speaker Output
Barrier strip x 2 pairs
Line Out
Stereo RCA pin, unbalanced
Control ports
RJ-45 (DCP1V4S)
Input Level
-10.0 dBV: Sensitivity / Nominal, +10.0 dBV: Max before clip (Unbalanced / Stereo Input)
Output Level
-10.0 dBV, Nominal (Line Out)
Protection circuit
Load protection
Power switch on/off: Mute the output, Output voltage protection: Compress the output, DC-fault: Power supply shutdown
Amplifier protection
Thermal: Limit the output → Mute → Shutdown (*Restored automatically), Over current: Mute the output (*Restored automatically), Integrated power limit: Compress the output
Power supply protection
Thermal: Power supply shutdown, Over voltage: Power supply shutdown, Over current: Power supply shutdown (*Restored automatically)
Amplifier class
Class D
Cooling
Conventional cooling, bottom to up airflow
Power requirements
100V, 120V, 230V-240V; 50Hz/60Hz
Power consumption
Music source equivalent
30W (1/8max. power, 3Ω, AC 100V, pink noise at all channels)
Dimensions
W
215mm (8.5”)
H
54mm (2.1”)
D
288mm (11.4”)
Net weight
1.8kg (4.0lbs)
Accessories
AC power cable, 3.5mm Euroblock plug (3-pin) x 1, Owner’s manual, Specification sheet
Options
RKH1 (Rack-mount Accessory), DCP1V4S (Digital Control Panel)
Others
Operating Temperature: 0°C to + 40°C, Storage Temperature: -20°C to + 60°C, Rack-mountable when ensuring sufficient ventilation above and below the unit
บริษัท ไลท์ แอนด์ ซาวด์ บิสิเนส จำกัด 7 ซอยโกสุมรวมใจ 29 แขวงดอนเมือง เขตดอนเมือง กรุงเทพ 10210 Tel : 02-981-0944 FAX:02-981-0744 Mobile:080-614-4774,098-565-9747 E-mail :lsbthai.com@gmail.com Website :https://www.soundprogroup.com , https://www.lsbthai.com