ราคาพิเศษ สอบถามโทร 080-6144774 , 02-9810944
ASHLY NE4250 MULTI-CHANNEL AMPLIFIERS 4 แชลแนล ,4 X 250 W.@ 4 Ohms,4 X 150 W. @ 8 Ohms, with separate hi-z and lo-z models
These NE Series Amplifiers are uniquely designed around an energy efficient Class-D platform with a switching power supply.
Connecting and controlling an amplifier for networked systems has now been simplified with ne Amplifiers. This line offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. No special outboard control units are needed.
Choose either 4 or 8-channel packages rated at 250W per channel, with separate hi-z and lo-z models. ne Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor. Each can be customized for any installation by adding your choice of AES3 inputs, mic pre inputs* or a CobraNet® card.
Power Ratings
NE is offered with 240V Line Voltage and either Low-Z or 100V output for International customers.
Model
|
Ch.
|
4Ω
|
8Ω
|
8Ω (br)
|
25V
|
70V
|
100V
|
ne 4250
|
4
|
250W
|
150W
|
500W
|
250W
|
250W
|
250W
|
Continuous Average Power Output: Per Channel, Low Z Models, Stereo Mode, All Channels Driven
Factory-Installed Options for NE 4-Ch:
• Protea™ DSP (pe model only)
• CobraNet® Digital Interface (CNM-2)
• Dante® Digital Interface (OPDante)
• 4-Channel, AES3 Input / Pass-thru (OPAES4)
• 4-Channel, Microphone Input (OPMIC4) *w/ Protea DSP (pe model only)
• AVB Digital Interface (OPAVB) *in development
Features:
• Balanced inputs via 3-pin Euroblock
and combo XLR/ ¼” TRS connectors
• Switch mode power supply provides
high efficiency and low weight
• Forced air cooled (front in, rear out)
• Removable dust filters
• Front mounted attenuators
• Rack ears for permanent installation in
a standard 2RU enclosure
• Speakon type output connectors
• 3-position gain switch for both channels
• 3-position mode switch
(bridged, stereo or parallel mono)
• 3-position HPF switch
(30Hz, 50Hz or off)
• On/off limiter switch
• Permanently attached power cord
• Extensive protection circuitry
• Safety/Compliance:
cCSAus, CE, FCC, Ro